Command Data Pattern; Bus Condition; Incomplete Frames; Ata Command - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy

Command Data Pattern

When selected, depending on the Filter Type, the Hide/Show selection shows or hides
captured Command Data Patterns in the Sample Viewer.

Bus Condition

When selected, depending on the Filter Type, the Hide/Show selection shows or hides
captured Bus Conditions in the Sample Viewer.

Incomplete Frames

When selected, depending on the Filter Type, the Hide/Show selection shows or hides
Incomplete Frames in the Sample Viewer.

ATA Command

When selected, depending on the Filter Type, the Hide/Show selection shows or hides
captured ATA commands in the Sample Viewer.

Protocol Error

When selected, depending on the Filter Type, the Hide/Show selection shows or hides
captured packets with the specified Protocol Errors in the Sample Viewer.

ATAPI SCSI Command

When selected, depending on the Filter Type, the Show/Hide selection shows or hides
ATAPI SCSI commands.

Filter Check Condition

Checking the SCSI Command Status check box enables Check Condition for filtering (see
Figure 3.102 on page
292
STP Frames

SCSI Commands

SMP Commands

Task Management Functions

ATA Commands

SCSI Command Status (see

Source SAS Address

Destination SAS Address

Pair SAS Address

Protocol Error

STP Port

Tag (see "Filter by Tag Number" on page

ATAPI SCSI Command

Device Sleep

Miscellaneous (see

Training Sequence

293).
"Filter Check Condition" on page
294).
"Filter Miscellaneous" on page
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Navigation + View Toolbar
292).
295).