Read/Write Command Report (Sas); Performance Report (Sas) - Teledyne Sierra M6-2 User Manual

Analysis
Figure 3.53: SAS Lanes Report

Read/Write Command Report (SAS)

To display the Read/Write Command Report, click the Read/Write Command tab. You can
enable or disable creation of this page under Preferences (see
page
following information:
Figure 3.54: SAS: Read Write Command Report

Performance Report (SAS)

To display the Performance Report, click the Performance tab (see
page
following information:
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
326). The Read/Write Command report displays the report data in columns with the
Source SAS Address

Destination SAS Address

Protocol Type

OpCode/Command

Tag

LBA

Sector Count

Xfer Length

Payload Size: All, Custom, or a number of DWORDs

Status: All, Custom, Good

Completion Time

Performance

Standard Deviation

Count: All, Custom, or a number

256). The Performance Report displays the report data in columns with the
Minimum Completion Time

Average Completion Time

Maximum Completion Time

Initiator Bus Utilization

Target Bus Utilization

Efficiency

Total Read Cmd

Total Read (Bytes)

Total Read Duration

Teledyne LeCroy
"Preferences" on
Figure 3.55 on
255