Launch Jammer; Launch Trainer; Crosssync Control Panel; Launching The Crosssync Control Panel - Teledyne Sierra M6-2 User Manual

Start Recording
The Analysis Project dialog offers you a comprehensive set of choices to create a trigger
and capture project satisfying some specific need. You can set the Analyzer to:
2.5.1

Launch Jammer

The Launch Jammer option invokes InFusion. For more information refer to
Overview" on page 367
2.5.2

Launch Trainer

The Launch Trainer option invokes Trainer. For more information refer to
Traffic Generation" on page
2.5.3

CrossSync Control Panel

The CrossSync Control Panel allows you to select analyzers for synchronization and
manage the recording process. It supports a wide combination of Teledyne LeCroy's
flagship analyzers including PCI Express, USB, DDR, Serial ATA (SATA), Serial Attached SCSI
(SAS), Fibre Channel (FC) and Ethernet.
CrossSync is Teledyne LeCroy's analyzer synchronization solution that enables time‐
aligned display of protocol traffic from multiple daisy‐chained analyzers showing packet
traffic from multiple high‐speed serial busses. A lightweight software control panel allows
users to select analyzers for synchronization and manage the recording process. Captured
traffic is displayed using the latest analyzer software (in separate windows) with all the
protocol specific search and reporting features.
Captured packets are displayed in separate windows that share a common time scale.
Navigating the traffic in either direction will scroll to the same timestamp in a
synchronized window. When using the CrossSync option, users can access the full
complement of analysis capabilities available within the individual Teledyne LeCroy
software. Search, reporting, and decoding all operate normally.
This feature is available with the Teledyne LeCroy SAS/SATA Protocol Suite application.

Launching the CrossSync Control Panel

To launch CrossSync from the SAS/SATA Protocol Suite software application, click on File
and select Launch CrossSync Control Panel (see the screens below). Or, you can launch
CrossSync from the 'Start' menu.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Capture specific patterns (see

Capture different patterns pre‐ and post‐trigger.

Exclude parameters from capture.

Trigger on a pattern or sequence of patterns (see

Configure trace capture memory (Settings tab).

Select file to save trace capture in memory (Settings tab).

Include a project note (Notes tab).

"Patterns and Data Capture Setup" on page
435.
Teledyne LeCroy
"Trigger Setup" on page
"InFusion
"Sierra Trainer
66).
81).
55