Headers Options - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy

5.18.6 Headers Options

You can choose the appearance of header fields. Select the Header tab, then select the
header.
Figure 5.32: Level Hiding Tab
Available headers are:
514
SSP Frame Header

SMP Report General (Request or Response)

SMP Report Mfg Info (Request or Response)

SMP Discover (Request or Response)

SMP Report Phy Error Log (Request or Response)

SMP Report Route Info (Request or Response)

SMP Configure Route Info (Request or Response)

SMP Phy Control (Request or Response)

SMP Phy Test Function (Request or Response)

SMP Configure Phy Zone (Request or Response)

SMP Configure Zone Permission (Request or Response)

SMP Report Zone Permission (Request or Response)

SMP Report Zone Routing Table (Request or Response)

STP Register Host to Device FIS

STP Register Device to Host FIS

STP Register Device Bits Device to Host FIS

STP DMA Activate Device to Host FIS

STP DMA Setup FIS

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Display Options