Teledyne Sierra M6-2 User Manual page 31

Expandability
Add Device...
Click Add Device to add a device with a static IP address.
Figure 1.14: Add Device with Static IP Dialog.
Force Add/Connect Attempt
Use this option if the application's Ping function fails (the button in the upper‐right
corner), but you're sure the address is correct and you still want to attempt the
connection. This setting is stored in the device.
Remove Device
Click Remove Device to remove a previously added device.
IP Settings...
Click IP Setting to reset IP settings of a device. The following IP Setting dialog displays.
Figure 1.15: IP Setting Dialog.
Networks...
Click Networks to select a network adapter. The following dialog displays.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Teledyne LeCroy
29