Procedure Definition; Sierra Trainer Generation Commands; General Commands - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
Syntax for clearing (resetting) counters is:
Example:

5.13.8 Procedure Definition

Procedures allow creating simple syntaxes for complex reusable parts in scripts. You can
write such code once as a procedure and use everywhere required.
Procedure definition syntax is:
Calling procedure syntax is:
5.14

Sierra Trainer Generation Commands

5.14.1 General Commands

IDLE (n)
CLEAR_CREDIT_AVAIL
RD_ERROR
472
@varName1 = COUNT_REC_RESOURCE_OUTPUT_A
@varName1 = COUNT_REC_RESOURCE_OUTPUT_B
@varName1 = COUNT_REC_RESOURCE_OUTPUT_C
@varName1 = COUNT_REC_RESOURCE_OUTPUT_D
@varName1 = COUNT_REC_RESOURCE_OUTPUT_E
@varName1 = COUNT_REC_RESOURCE_OUTPUT_F
CLEAR_REC_RESOURCE_OUTPUT_A
CLEAR_REC_RESOURCE_OUTPUT_B
CLEAR_REC_RESOURCE_OUTPUT_C
CLEAR_REC_RESOURCE_OUTPUT_D
CLEAR_REC_RESOURCE_OUTPUT_E
CLEAR_REC_RESOURCE_OUTPUT_F
CLEAR_REC_RESOURCE_OUTPUT_A
While(@Counter < MaxPrimitiveCount) {
... @Counter = COUNT_REC_RESOURCE_OUTPUT_A ... }
procedure procedureName
{
...
}
Call procedureName
Sierra Trainer Generation Commands
Generator will insert n idle
generation stream.
This commands clears the credit
established with the command
WF_CREDIT_AVAIL. (See WF_CREDIT_AVAIL
in following section on Wait Commands for
explanation).
Generator will insert one idle
the generation stream, which will
intentionally break RD sequence creating
RD error.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
s into the
DWORD
into
DWORD