Setting Up For Generating Initiator Traffic - Teledyne Sierra M6-2 User Manual

Setting Up for Generating Initiator Traffic

The buttons have the following functions:
5.3 Setting Up for Generating Initiator Traffic
Connect the SAS cable from the Target port of the Sierra Analyzer to the Target port on
the unit under test. This transmits the Traffic Generator stream from the Target port to
the target‐side port on the unit under test.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Open Document.
Edit as Text. Edit the text file for
the document.
Zoom In.
Wrap.
Find Next.
Stop All Generation.
Connect All Link.
Setup Generation Options.
Opens the Generation Options
window.
Launch Analyzer.
Stop Recording.
Show Port Configuration Dialog.
(See "Ports Configuration" on
page 112.)
Tile Windows
Save As. Opens a dialog in
which you can save your edits
in the appropriate file type.
Setup Display Options. Opens
the Display Options window.
Zoom Out.
Find.
Start All Generation.
Resume All Generation.
Disconnect All Link.
Launch Jammer (Infusion).
Start Recording.
Abort Recording.
Show Script Assignment
Dialog.
(See section below.)
Assign Active Script/
Remove Assigned
Script for
Link 1, 2, 3, or 4
See "Multi‐Port Trainer Script
Assignments to Links" on
page 455.
Teledyne LeCroy
441