Example 3: Creating Or Conditions - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
4.9.3

Example 3: Creating OR Conditions

In this example, the Global Rules area of the scenario waits for either of two types of
RRDY primitive and replaces them with an ERROR primitive.
This example includes a combined event (a logical OR association of two or more single
events). Here, the combined event consists of any occurrence of RRDY (Normal) or RRDY
(Reserved 0).
1. Click the New Scenario button in the main library or one of the device libraries. In
2. In the Global Rules area, click the prompt to add an event to display the
3. As you did in example 1 of this chapter, choose RRDY (Normal) as the first primitive
4. Click the add combined event prompt to add a second event.
Figure 4.32: Example 3: Entering the Second Event
5. Choose RRDY (Reserved 0) as the second primitive that you want to monitor.
6. Click OK to close the Event Properties dialog box.
7. In the Global Rules area, click the prompt to add an action to display the Action
8. In the Type list on the left, choose Substitute SAS Primitive as the action that you
9. Click OK to close the Action Properties dialog box.
406
the Scenario Properties dialog, enter the scenario name, description, and direction
of traffic change.
Event Properties dialog box.
that you want to monitor.
The Event Properties dialog box displays.
Properties dialog box.
want when either RRDY Reserved 0 or RRDY Normal occurs.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Creating Global Rules