Teledyne Sierra M6-2 User Manual page 413

Creating Global Rules
Figure 4.39: Example 6: Entering the Second Event
4. In the Type column on the left, choose Timer. Set the timer for random timing with a
5. Click OK to close the Event Properties dialog box.
6. Click the prompt to add an action to correspond with the second event.
Figure 4.40: Example 6: Entering Second Action
7. In the Type list on the left, choose Stop Scenario as the action that you want after
8. Click OK to close the Action Properties dialog box.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
The Event Properties dialog box appears.
maximum time limit of 1.790 seconds.
The Action Properties dialog box appears.
the timer has expired.
Teledyne LeCroy
411