Changing The Default View; Spreadsheet View - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
Figure 3.22: Goto Response Trace
3.3.4

Changing the Default View

Perform the following steps to change the default view of all trace files to Packet View:
1. Open a trace file.
2. Select the Packet View. Close all other views.
3. Select File > Save Workspace to open a Save As dialog. Save the current workspace
4. Select Setup > Preferences and select the Trace Viewer tab.
5. In the Default Workspace field, enter the path and name of the workspace .wss file
Because the default workspace contains only Packet View, the software opens trace files
in Packet View.
3.3.5

Spreadsheet View

Spreadsheet View displays all of the Packet View fields in a time sequential spreadsheet
format. To display the Spreadsheet View of the current capture, click
Analysis > Spreadsheet View or click the
236
as a .wss file.
that you saved in step 3.
button on the toolbar.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Analysis