Device Ports; Using The Device Ports Dialog - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
A File Library has Scenarios currently available in the device.
Using the buttons from left to right, you can:
4.2.5

Device Ports

If a device is connected, the software displays the Device Ports.
Figure 4.4: Device Ports.
Using the first row of icons, you can Run/Stop All Ports or Run/Stop individual ports.
The columns display the Port, Function/Configuration, Library, and Scenario.
You can Float, Dock, Auto‐Hide, or Hide the window.
Note:
A port row is grayed out when that port has not been configured to be a Jammer in the
Port Configuration dialog (see "Port Configuration for InFusion" on page 374).

Using the Device Ports Dialog

After you have finished Port Configuration (see
page
different scenarios can run on different ports.
To assign a scenario to a port, drag and drop the scenario from any library window to the
port. The Device Ports dialog then displays the Library and Scenario on the row for that
Port/Configuration.
372
New scenario.

Save selected scenario.

Save library.

Save a copy of the library as.

View/edit a selected item.

Insert a copy.

Delete a selected scenario.

Copy

Paste

374), you use the Device Ports dialog to assign specific scenarios to ports, so that
"Port Configuration for InFusion" on
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Interface