Teledyne Sierra M6-2 User Manual page 519

Resetting the Toolbar
From time to time (such as following a software upgrade), it is possible for the buttons on
the toolbar to not match their intended function. You can reset the toolbar by performing
the following steps:
1. Select View > Toolbars from the menu bar.
2. Select Customize from the submenu to display the Customize dialog box.
Figure 5.34: Customize Commands
3. Select the Toolbars tab to display the Toolbars page of the Customize dialog box.
Figure 5.35: Customize Toolbars
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Start Generation

Stop Generation

Resume Generation

Connect Link

Disconnect Link

Generation Options

Teledyne LeCroy
517