5.3
OPERATIONAL HEALTH CHECKS
Navigate to the Utilities>USB Utilities>Report menu (Figure 5-1) to download a report
on the basic operations of the instrument. To download the report for your own viewing
on a computer or to send to others, insert a flash drive into a front panel USB port and
press the Download button, which is enabled when the instrument detects the flash drive.
The report can also be set to generate periodically and sent to a Web services "cloud"
where it is available for viewing by Teledyne API technical support personnel. Set this
function with two Vars:
Setup>Vars>Upload Report to Cloud: set to True.
Setup>Vars>Report Upload>Interval: edit the number of hours between report uploads.
5.4
SOFTWARE/FIRMWARE UPDATES
There are two ways to check for and acquire updates: either remotely or manually.
5.4.1 R
EMOTE
The instrument must be connected to a network that is connected to the Internet. In the
Setup>Instrument menu, select the Remote Update menu and press the Check for
Updates button. If an update is available, it can be downloaded through this page.
083730400A DCN8130
Figure 5-1. Report Generation Page
U
PDATES
Teledyne API – Model T400 O
Analyzer
3
101