Byte Order; Choose Data Format - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
Figure 3.122: Goto Command
In Column View, you can right‐click a DWORD inside a frame to display the
Goto Within Packet command. You can jump to an SOF, EOF, HOLD, or R_IP.
Figure 3.123: Goto Within Packet Command

Byte Order

You can change the byte order in fields marked by an arrow and other fields.
Right‐click in the field, select Byte Order, and choose the ordering.
Figure 3.124: Byte Order
Note:
A blue arrow in the byte order field indicates that it has been changed.

Choose Data Format

You can display data values either in hexadecimal (default) or binary. To choose data
format, right‐click the mouse over a data field, and choose Format and the format (see
Figure 3.125 on page
312
313).
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Packet View Toolbar