State Number For Complex Trigger Sequences; Setting Trigger Conditions - Teledyne Sierra M6-2 User Manual

Advanced Mode (User‐Defined)
SATA Dialog has patterns Bus Condition, Primitive, FIS, FIS Pattern, Data Pattern, and
Protocol Errors and does not have STP Frame, SMP Frame, STP Frame, or Address Frame.
Figure 2.108: SAS: Advanced Trigger with multiple branches

State Number for Complex Trigger Sequences

To follow the path of complex trigger sequences, you can display state numbers in a trace.
To see state number, in Packet View right‐click a link layer packet, show field, and select
state number.

Setting Trigger Conditions

To set the If and Else If trigger condition:
1. Click the Add Pattern button
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
from the drop‐down list
for a Pattern field and choose a trigger condition
(Figure 2.109 on page 120).
Teledyne LeCroy
119