Available Resources - Teledyne Sierra M6-2 User Manual

Scenario Actions
1
Only shown in Action Properties dialog box when creating a sequence.
4.8.1

Available Resources

You can specify Events, Combined Events and Actions and additional Events. The
application automatically checks for the maximum number of terms (Events/Actions).
When you exceed the limit, an error is flagged, prompting you to jump to the place that
caused the error.
The list of available resources is given below:
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Action
SNW Speed Negotiation
Retime
Speed Negotiation
Violation
Stop Scenario
Substitute Data DWORD
with SAS Primitive Substitutes a SAS primitive in the traffic.
with SATA Primitive Substitutes a SATA primitive in the traffic.
Trigger Output
External Trigger X 1

Analyzer Trigger X 1

Training Detector x 4

Primitive Detector (each has its own Embedded counter in M12x) X 8

Pattern Detector (each has its own Embedded counter in M12x) X 8 (a total of 12

DWORD detectors are shared between all pattern detectors)
Frame Type Detector X 24

Counter X 12

Timer X 8

OOB X 1

ComWakeDetected X 1

ComWakeCompleted X 1

ComInitDetected X 1

ComInitCompleted X 1

ComSasDetected X 1

ComSasCompleted X 1

Snw1 X 1

Snw2 X 1

Snw3 X 1

SnwFinal X 1

SnwTrain X 1

Description
Set RCDT, SNTT, ALT/TLT, TX speed, TRAIN/
TRAIN_DONE pattern, and/or PHY Capability.
Set Violation Type.
Stops all scenario activity.
Substitutes a data DWORD in the traffic.
Sends a signal out the trigger port to the device
downstream.
The trigger point in the Analyzer that caused the
analyzer trigger action will not be the selected event,
it will be the selected event with some offset.
Teledyne LeCroy
393