Data Pattern - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy

Data Pattern

Double‐click Data Pattern in the Pattern window to open the Data Pattern dialog.
Figure 2.78: SAS: Data Pattern Dialog
SAS vs. SATA: SATA Dialog shows Port at the top and does not show SSP or STP.
Define the data pattern for triggering and click OK.
Note:
When entering the data pattern in the "Data" section of this screen, if you are reading the data
pattern from a recorded trace, you must reverse the order of the bytes listed for each DWORD
entered. For example, if you want to trigger on "00 01 02 03" (as displayed in the trace), you
must enter this DWORD pattern as "03 02 01 00".
92 Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Projects