Teledyne Sierra M6-2 User Manual page 165

Emulation
Check Auto update "sector Count/Transfer Len" before running ‐ If you want to
automatically calculate the sector count and transfer length per the payload data length.
Keep this unchecked to use the values entered manually in the emulation script.
Note:
Checking this option will manipulate the emulation script with the calculated values, but
unchecking it afterwards will NOT revert to the previous values. It is recommended to save a
copy of your script before checking this option. The message shown in
displays when you check this option.
Queue Settings
Click the Queue Settings button to display the Queue Settings dialog (see
page
Specify the Queue Depth or SCSI.
Figure 2.173: Queue Setting Dialog
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
163) and specify:
Queue Depth

NCQ Error Recovery

Queued/Non‐Queued Items Status

NCQ/Queue Command Timeout

Teledyne LeCroy
Figure 2.179 on page 168
Figure 2.173 on
163