Sata Commands; Primitive Commands - Teledyne Sierra M6-2 User Manual

Sierra Trainer Generation Commands
set_trainer_interconnect_signal_1
or settrainerinterconnectsignal_1
set_trainer_interconnect_signal_2
or settrainerinterconnectsignal_2
set_trainer_interconnect_signal_3
or settrainerinterconnectsignal_3
set_trainer_interconnect_signal_4
or settrainerinterconnectsignal_4

5.14.2 SATA Commands

Look at STP sample file for syntax.

5.14.3 Primitive Commands

The following is a list of SAS and SATA primitives declared in Primitives.Decl.inc as Symbol
Chains. If you want to use these primitives in your script, you must also include
Primitives.Decl.inc in your script.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
SEND_SATA_FRAME

SendSATAFrame

SATAData

SATA_Data

SATACRC

SATA_CRC

SATAXXXX

SATA_XXXX

SOF

EOF

SOAF

EOAF

ALIGN (0)

ALIGN (1)

ALIGN (2)

ALIGN (3)

NOTIFY (ENABLE SPINUP)

NOTIFY (RESERVED 0)

NOTIFY (RESERVED 1)

NOTIFY (RESERVED 2)

Set these signals to allow other ports to
wait on them using
WF_TRAINER_INTERCONNECT_SIGNAL_1
Set these signals to allow other ports to
wait on them using
WF_TRAINER_INTERCONNECT_SIGNAL_2
Set these signals to allow other ports to
wait on them using
WF_TRAINER_INTERCONNECT_SIGNAL_3
Set these signals to allow other ports to
wait on them using
WF_TRAINER_INTERCONNECT_SIGNAL_4
Teledyne LeCroy
475