Teledyne Sierra M6-2 User Manual page 404

Teledyne LeCroy
Figure 4.27: Example 1: Adding an Event
4. In the Type column of the Event Properties dialog, choose Primitive > SAS Primitive.
5. In the Type column in the middle of the dialog box, click Description if you want to
6. Click Direction to choose the direction of traffic to monitor for the selected event
7. Still in the middle column of the Event Properties dialog box, click Primitive to
402
The Event Properties dialog box appears (see
add a description of the event.
(the default is From Initiator, which is what you want for this example).
display a drop‐down menu that lets you choose the type of primitive for which you
want to wait in this scenario. In this example, it is RRDY (Normal).
Figure 4.17 on page
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Creating Global Rules
386).