Window; Help; Toolbars - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy

1.21.8 Window

The Window menu has the following options:

1.21.9 Help

For more information see

1.21.10 Toolbars

The toolbars enable you to perform several actions, some of which are listed below.
There are six sets of toolbars (see the following screen capture):
46
Cascade: Displays all open windows in an overlapping arrangement.

Tile Horizontal: Displays all open windows in a above‐below arrangement.

Tile Vertical: Displays all open windows in a side‐by‐side arrangement.

Arrange Icons: Arranges minimized windows at the bottom of the display.

Close All: Closes all windows.

"Help Menu" on page 340.
Show or hide fields and ports, change port names, and change data format.

Show the layers and channels using their toolbars.

Decode using the Decode toolbar.

Search and Filter.

Main Toolbar ‐ For details on the Main Toolbar refer to

page 52 and "SATA Main Toolbar" on page
Record Capture Toolbar ‐ For additional information see

page 52 and "SATA Main Toolbar" on page
Target/Device Emulator Toolbar ‐ For additional information see

bar" on page 52 and
Navigation + View Toolbar ‐ For additional information see

Toolbar" on page 282.
Show Analysis Toolbar ‐ For additional information see

on page 224.
Packets View Toolbar ‐ For additional information see

page 305.
Column View ‐ For additional information see

Cursor Position‐ For additional information see

marks" on page 317.
Target Emulator‐ For additional information see

Toolbars" on page
Teledyne LeCroy SAS/SATA Protocol Suite Menu Options and Toolbars
"SATA Main Toolbar" on page
52.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
"SAS Main Toolbar" on
53.
"SAS Main Toolbar" on
53.
"SAS Main Tool‐
53.
"Navigation + View
"Show Analysis Toolbar"
"Packet View Toolbar" on
"Column View" on page
"Using the Cursors and Book‐
"SAS/SATA Software Menus and
238.