Fis Report (Sata); Queue Command Report (Sata) - Teledyne Sierra M6-2 User Manual

Analysis
Figure 3.56: SATA: Performance Report

FIS Report (SATA)

To display the FIS Report (see
displays information in the following columns:
Figure 3.57: SATA: FIS Report

Queue Command Report (SATA)

To display the Queue Command Report, click the Queue Command tab (see
on page
columns:
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
FIS Maximum Difference Time

FIS Type: All, Custom, Data, PIO Setup, Register Host To Device,

Register Device To Host
PM Port

Direction: All, H‐>D, D‐>H, or Custom

Duration: All, Custom, or time unit (accumulative)

Count: All, Custom, or a number of occurrences

%: of total count

258). The Queue Command Report displays information in the following
Command: All, Custom, Read DMA Queued

PM Port

Status: All, Custom, Normal Output

Payload Size: All, Custom, or a number of DWORDs

Direction: All, H‐>D, D‐>H, or Custom

Duration: All, Custom, or time unit (accumulative)

Figure 3.57 on page 257), click the FIS tab. The FIS Report
Teledyne LeCroy
Figure 3.58
257