Example 6: Using Timers - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
Figure 4.38: Example 5: Complete Scenario
8. In the File menu, select Save Scenario to save the scenario.
4.9.6

Example 6: Using Timers

In this example, the Global Rules portion of the scenario waits for an ACK primitive from
the initiator. Each time the device detects an ACK, it injects an RD Error into the traffic
stream. This state continues for a random period of time, not to exceed 1.790 seconds.
After the time period has elapsed (timer times out), the scenario stops.
Although this example sets the timer for a random period, you also can set the timer for
known values (2 ms., 5 mins., 1 hr., and so on).
1. Click the New Scenario button in the main library or one of the device libraries. In
2. As in previous examples, configure the first event and its response in the Global
3. Click the prompt to add another event (keep in mind this is not a combined event)
410
This example sets the counter to increment at each occurrence of an ACK
(every 1 ACK).
the Scenario Properties dialog, enter the scenario name, description, and direction
of traffic change.
Rules area. Choose ACK primitive as the event and Inject RD Error as the action.
(see Figure 4.29 on page 404).
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Creating Global Rules