Export To Trainer - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
You can limit the range of the saved file. You can save:
You can export SCSI Commands, Task Management, FIS, ATA Commands, Device Sleep,
SSP Frames, SMP Frames, SMP Commands, or STP Frames.
You can select the Port.
In the Project Name, enter a valid file name.

Export to Trainer

The Export to Trainer dialog, accessible from the File menu, allows exporting data to a file
in a format supported by the timer.
Figure 2.37: Export to Trainer (SATA) Dialog.
In the Export to Trainer dialog you can
60
All Trace

Range between selected cursors

Range between SCSI Commands or Transport

Limit the range of the saved file. You can save:

All Traces

Range between selected cursors

Range between SCSI Commands or Transport

You can import SSP Frames, SMP Frames, or STP Frames (see

Properties" on page
Insert Waits inserts the appropriate Wait_for commands in the Trainer script as

a function of the protocol state machine. An example would be to insert a
Wait_for open_accept after an open command is exported. This allows the
script to work, even if the DUT has different timing than the DUT in the original
trace. See "Wait Commands" on page
Insert Delays inserts the exact delays as they appear in the original exported

504).
479.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Start Recording
"Events and Event