Catc Navigation View - Teledyne Sierra M6-2 User Manual

Packet View Toolbar
3.9.1

CATC Navigation View

To change the trace display to a CATC Trace™ (see
CATC Navigation
Viewer Configuration (see
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
The Pack/Unpack Repeated Primitives toggles packing repeated primitives in
one port. SAS only.
The 10B button displays the payload data as 10‐bit encoded data.
The 8B button displays the payload as 8‐bit scrambled or unscrambled data,
depending on the Scrambled setting.
The SC button selects scramble/unscramble for the 8‐bit payload data.
The PV button shows/hides the primitive value.
button. You can change the colors, fonts, and so on, in the Trace
"Trace Viewer Configuration" on page
Figure 3.114 on page 308), click the
318).
Teledyne LeCroy
307