Primitives Decl.inc File; Address Framesdecl.inc File; Sspframes.inc File; Smpframes.inc File - Teledyne Sierra M6-2 User Manual

Starting the Script Editor

5.8.2

Primitives Decl.inc File

The PrimitivesDecl.inc file defines Primitives. The file consists of declarations (left) and
the corresponding byte streams (right).
To generate Primitives, copy relevant portions of text on the left (not the bytes shown
right) from this file into the generator block section of the .ssg file.
5.8.3

Address FramesDecl.inc File

The AddressFramesDecl.inc file defines Address frames.
5.8.4

SSPFrames.inc File

The SSPFrames.inc file defines SSP frames.
5.8.5

SMPFrames.inc File

The SMPFrames.inc file defines SMP frames.
5.8.6

STPFrames.inc File

The STPFrames.inc file defines STP frames.
5.9 Starting the Script Editor
To edit an .ssg file, use the Script Editor. The Script Edit editing tool displays the .ssg file
and its supporting Include files. The Script Editor utility has several aids to simplify the
process of writing and editing scripts: tool‐tips, drop‐down menus, and colored fields. The
Script Editor example below shows several commented lines followed by some
instructions. The Script Editor has three areas: toolbar (top), script window, and file tabs
(at the bottom of the window). If errors occur, a log opens at the bottom of the window.
Note: If more than one port of Trainer is licensed, you can assign scripts to one or more
ports. See
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
If the generation file was created through the Export command (File > Export > To
Generator File Format ...), the CRC is calculated but commented out. If the source
trace has a bad CRC, the CRC is exported into the generation file and is not
commented out.
"Multi‐Port Trainer Script Assignments to Links" on page
Teledyne LeCroy
455.
451