Scenario Libraries; Main Library; File Libraries - Teledyne Sierra M6-2 User Manual

Scenario Libraries

4.5.1

Main Library

When you launch the InFusion application, it opens a window called the Main Library. The
main library is the default workspace for creating and storing new scenarios. The main
library corresponds with the following file in the InFusion folder on the host machine's
hard drive:
4.5.2

File Libraries

You can save the main library with a name other than default (while still using the .infdb
file extension). The new file becomes a file library that is functionally equivalent to the
main library with the following exception: It does not open by default in the Main Library
window. You can navigate to other file libraries using the File Manager of the InFusion
application.
In this manual, the main library and other .infdb file libraries are collectively called
general libraries.
If you select Open Library, you see a window similar to the following:
Figure 4.12: Open Library File List
By selecting the TestCasesForSATA.infbd file, you get an additional library window with
predefined SATA test cases, similar to the following:
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
default.infdb
Teledyne LeCroy
381