Teledyne LeCroy
The analyzer provides for bi‐directional trigger and capture of commands, primitives,
patterns and all bus conditions. You can capture all frames and/or exclude traffic.
The InFusion™ Error Injector and Traffic Modifier is an error injector and traffic
modification tool that allows you to verify real‐world fault handling.
The Trainer is a traffic generator that can emulate a SAS initiator/target or SATA host/
device.
The Sierra M6‐2 Analyzer has a USB port and an Ethernet port to connect to a computer.
You can cascade analyzer units for higher port counts. The analyzer allows you to select
frames to include and exclude for capture. Capturing can be triggered based on a specific
event or manually.
The Sierra M6‐2 Analyzer provides a full range of views and statistical reports.
1.2
Features
1.3
Receiving Your Analyzer
The analyzer package includes the following components:
18
6 Gb/s SAS/SATA protocol analysis or error injection
Native PHY for fast lock time
Easy mode triggering
Cascade up to 8 analyzers
Sync with Teledyne LeCroy Sierra and STX family products
CrossSync Control Panel
Hardware filtering
Automatic error detection
Comprehensive decoding of SAS and SATA data traffic
Logical and chronological traffic displays
Statistical reporting
Trace memory of 4 GB or 8 GB
GbE & USB 2.0 host interfaces
Capture, triggering, and filtering of Serial Attached SCSI packets or Serial ATA
packets
TX Vout on transmitters for test and characterization
Automation API
Error Injection Functionality (Jammer)
Emulation support
Trainer traffic generation
1 Sierra M6‐2 Analyzer identified in the packing list
2 SATA cables, 0.5 meter
1 USB A‐B 2.0 cable, 1.8 meter
1 Ethernet cable, 10 feet
1 10‐position ribbon cable, 6 inches
1 SMB RA to SMB RA cable, 6 inches
1 Three‐Prong AC power cord
1 Installation DVD‐ROM with software and documentation
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Features