Summary Of Scenario Creation - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy
When the Jammer implements this action, the result is adding a marker to the captured
trace in the analyzer data stream. See
(Bookmark = Jammer Marker 7) will be shown as a bookmark in the trace and you can see
the list of markers in the bookmark dialog.
Note:
As a function of recorded speed and port configuration, the InFusion marker might be off
by a tolerance of up to 200 nsec.
Note:
The limitation for adding markers to a trace is 10,000.
Figure 4.26: Sequence 0: Event = Wait for CRC Error, Action = Add Jammer Marker 7
4.8.4

Summary of Scenario Creation

The suggested process of creating and executing a scenario is as follows:
1. Create a scenario in the main library.
2. Copy the scenario from main library to a device library by drag‐and‐drop with a
3. Download all scenarios in the device library to a InFusion device.
4. Select the scenario in the device library that you want to run on the device.
5. To run the scenario, click the Start Scenario button from the Device Library toolbar.
400
mouse. (Each device library is associated with a specific InFusion device.)
The device starts to monitor/modify traffic.
Figure 4.26 on page 400. The added marker
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Scenario Actions