Declaration Of Conformity - Bosch ART EASYTRIM Accu 23 Original Instructions Manual

OBJ_BUCH-2333-001.book Page 15 Tuesday, November 18, 2014 4:33 PM
Cordless Trimmer
Battery Charger
Article number
Charging current
Allowable charging temperature range
Weight according to EPTA-Procedure 01/2003
Protection class
Please observe the article number on the type plate of your garden product. The trade names of the individual garden products may vary.
Noise/Vibration Information
Sound emission values determined according to
EN 50636-2-91.
Typically the A-weighted noise levels of the product are:
Sound pressure level 72 dB(A); sound power level 94 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60335:
2 2
a <2.5 m/s , K =3 m/s .
h

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC, 2000/14/EC including their amendments and
complies with the following standards: EN 60335-1,
EN 50636-2-91.
2000/14/EC: Guaranteed sound power level 88 dB(A). Con-
formity assessment procedure according to Annex VI.
Equipment category: 33
Notified body:
SRL, Sudbury England, Nr. 1088
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS23,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
17.11.2014
Mounting and Operation
 Do not disassemble guard and metal tube once con-
nected.
Check the guard screw is fixed tightly before using.
Check the tube joint is on correct position before using.
Bosch Power Tools
ART 23 EASYTRIM ACCU/
ART 2300 EASYTRIM ACCU
AL 1404
2 607 225 ...
mA 400
°C 0– 45
kg 0.4
/ II
Action
Delivery Scope
Connecting the Tube
Mounting the Cutting Guard
Replace the blade
Charging the Battery Pack
Inserting and removing the battery
pack
Switching On and Off
Working Advice
Maintenance, Cleaning and Storage 7
Selecting Accessories
Starting
For Your Safety
 Warning: Switch off and remove battery from machine
before adjusting or cleaning.
 The blade continues to rotate for a few seconds after
the cordless trimmer is switched off. Allow the mo-
tor/blade to stop rotating before switching "on" again.
 Do not rapidly switch off and on.
 Only use Bosch approved cutting elements. Cutting
performance will vary with different cutting elements.
Battery Charging
 Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the name-
plate of the battery charger. Battery chargers marked with
230 V can also be operated with 220 V.
Charging Procedure
The charging procedure starts as soon as the mains plug of
the battery charger is plugged into the socket outlet and the
battery is inserted into the charging compartment .
The battery charge indicator is not a charge-control indica-
tor. The lit indicator signalises the flow of charging current.
English | 15
ART 26 EASYTRIM ACCU/
ART 2600 EASYTRIM ACCU
AL 1404
2 607 225 ...
400
0– 45
0.4
/ II
Figure Page
1 223
2 223
3 224
4 224
5 224
6 225
225
8 225
F 016 L81 227 | (18.11.14)