Declaration Of Conformity - Bosch GFR Professional 25 Original Instructions Manual

OBJ_BUCH-2143-003.book Page 16 Friday, October 7, 2016 5:44 PM
16 | English
Noise/Vibration Information
Sound emission values determined according to EN 50636-2-91.
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K deter-
h
mined according to EN 50636-2-91:
Vibration emission value a
h
Uncertainty K

Declaration of Conformity

We declare under our sole responsibility that the product described
under "Technical data" is in conformity with all relevant provisions of
the directives 2011/65/EU, until 19 April 2016: 2004/108/EC, from
20 April 2016 on: 2014/30/EU, 2006/42/EC, 2000/14/EC includ-
ing their amendments and complies with the following standards:
EN 60335, ISO 11806, EN 50581.
2000/14/EC: Guaranteed sound power level:
Conformity assessment procedure according to Annex V.
Conformity assessment procedure according to Annex VI.
Equipment category: 33
Notified body:
DEKRA Certification B.V.
Meander 1051
6825 MJ Arnhem
Netherlands
Nr. 0344
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-HG/ENS-PA2,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
Mounting and Operation
The numbering of the figures refer to the illustrations of the
machine on the graphics page.
Action
Delivery Scope
Handle Assembly
F 016 L81 659 | (7.10.16)
dB(A)
dB(A)
m/s
m/s
dB(A)
Action
Mounting the blade guard
Mounting the Friction Plate
Combination of Cutting Tools and
Guards
Replace the Blade
Replace the Spool
Replace the Line
Inserting/Removing the Battery
Mounting the Comfort Harness
Switching On and Off
Working Advice
Selecting Accessories
Product Transportation
 Always transport machine with safety guard fitted.
 Always transport machine without battery fitted.
 Eyelet can be used to tether machine for secure transpor-
tation.
Figure Page
1 120
2 121
3 600 J13 000 3 600 J13 001
68
78
dB =3
2
<2.5
2
=1.5
3 600 J13 000 3 600 J13 001
79

–
Figure Page
3 121
4 122
5 123
6 123
7 124
8 125
9 125
10 125
11 126
12 127–128
Bosch Power Tools
81
91
=2
<2.5
=1.5
93
–
