Starting Remote Console By Using Server Blade Web Console - Hitachi CB 520H B1 Service Manual

Tip: 1. When the server blade is powered off and video output is lost, No
Signal is displayed.
2. You can see the advance usages about the remote console in the following
reference guide.
• Hitachi Compute Blade 500 Remote Console User's Guide

Starting remote console by using server blade Web console.

1 Start the Web browser on the system console connected to the
.
management LAN, type the server blade Web console URL: https://<BMC
IP address>/ in the address bar, and press Enter. The following logon
screen is displayed. Enter user01 in Username and pass01 in Password
for the server blade remote console in the following text boxes, and then
click OK.
This user name and password combination is the initial setting (the
setting at shipping time). If you have modified the settings, enter the
modified user name and password as necessary.
2 The Remote Console Launch window is displayed. Click Launch
.
Remote Console.
Figure 8-4 Logon to the remote console
Diagnosing server blade
Hitachi Compute Blade 500 Series System Service Manual
8-5