Setting Mode - Sony GY-8240UWD Maintenance Manual

1-11-4. Setting Mode

The setting mode comprises of six modes to be used for adjustment as bellow.
The setting value can be changed in every setting mode, yet use care that the change of the setting is
valid, yet in some case invalid. Even if changing in the invalid status, the setting value is not reflected.
(Refer to the following list of valid status for change.)
n
In the setting mode (XXX:YYY is displayed on the LCD), the operation key such as FWD can not be
accepted.
In the setting mode, the LED (LOCK) is blinking for notice.
Shifting to the Setting Mode
1. Select the setting mode by pressing the switches S115 (UP) and S114 (DOWN) in the line mode.
2. Press the switch S120 (MENU) for determination.
(Shifting to the setting mode, the character after "KEY" changes from "=" to ":".)
LCD indication (Setting mode indication status)
IDR:012345 > STOP
KEY =
1 2 3
3. To change the setting value, press the specific key listed in the following list.
4. To exit from the setting mode, press the switches below.
When storing the setting value:
When storing no setting value:
GY-8240UWD
GY-8240FC
LCD indication (Setting mode execution status)
S120 (MENU)
IDR:012345 > STOP
KEY : ? ? ?
S110 (ESC)
S117 (ENTER)
1
S117 (ENTER)
S110 (ESC)
4 5
1-11. Line Mode
1-31