Setup Information Set - Sony GY-8240UWD Maintenance Manual

5-10-3. Setup Information Set

Function: Sets the setup data.
Operation: Enter "1"".
The screen will prompt for the setting value. Enter a setting value for each item, and press ".
Pressing only " does not change the current value.
(The current value is displayed in the [ ].)
At the end, a message to confirm whether to set the value entered will be displayed. Entering "y"" sets
the values. Entering "n"" cancels the setting.
For GY-8240UWD
"
SETUP=> 1
*****[ SETUP INFORMATION SET ]*************************
SCSI ID (0-15)
IP address (0-255 each)
Subnet mask (0-255 each)
Gateway address (0-255 each)
Unload mode (0:NORMAL/1:FAST)
Auto load mode (0:OFF/1:ON)
Fast unload location (0:NORMAL/1:TOP) [0]
Auto format mode (0:OFF/1:ON)
On the halfway (0:OFF/1:ON)
Compression mode (0:SCSI/1:ON/2:OFF)
File mark flush mode(0:OFF/1:ON)
Recover TYPE (0-2)
Fast read mode (0:OFF/1:ON)
Are you sure?(Y:yes/N:no)=> y
1. SCSI ID
Function: Sets the SCSI ID.
Setting:
Value between 0 and 15 is acceptable.
2. IP address
Function: Sets the ID address.
Setting: The area is divided into four blocks. Value between 0 and 255 is acceptable for each of the
four blocks.
Enter "." between each block.
3. Subnet mask
Function: Sets the subnet mask.
Setting: The area is divided into four blocks. Value between 0 and 255 is acceptable for each of the
four blocks.
Enter "." between each block.
4. Gateway address
Function: Sets the gateway address.
Setting:
The area is divided into four blocks. Value between 0 and 255 is acceptable for each of the
four blocks.
Enter "." between each block.
GY-8240UWD
GY-8240FC
[5]
[127. 0. 0. 1] => 127.0.0.1
[255.255.255. 0] => 255.255.255.0
[ 0. 0. 0. 0] => 0.0.0.0
[1]
[1]
[0]
[0]
[0]
[0]
[1]
[1]
Setup Information Set Execution Screen
=> 5
=> 1
=> 1
=> 0
=> 1
=> 0
=> 1
=> 0
=> 1
=> 0
5-10. SETUP Mode
5-121