Sony GY-8240UWD Maintenance Manual page 158

3-20. Threading Ring Assembly Replacement
26. Installing the W Cleaner Assembly
Install the W cleaner assembly.
(Refer to steps 4 to 6 in Section 3-5.)
27. Installing the PA Guard
Install the PA guard.
(Refer to step 5 in Section 3-15.)
28. Connecting the Flexible Card Wire
(1) Connect the flexible card wire to the connec-
tor CN2 of the HN-258 board and lock it.
(2) Connect the flexible card wire to the connec-
tor CN2 of the CT-205 board and lock it.
29. Connecting the Harness
Connect the harness to the connector of the CTL/
TC head board.
Adjustment after Replacement
30. Confirming the Threading mechanism
Operation
(CH01: Threading Motor Check)
Refer to Section 5-4-13.
31. Confirming the Cleaning Solenoid
Operation
(CH05: Pinch Roller and Cleaning Roller Sole-
noid Check)
Refer to Section 5-4-13.
3-72
CN2
CT-205 board
Flexible card wire
Flexible card wire
Connect the Flexible Card Wire and the Harness
32. Confirming the Pinch Press Clearance
Refer to step 5 in Section 3-10.
33. Confirming the Tape Running
Refer to Section 4-3.
CTL/TC head assembly
Harness
HN-258 board
CN2
GY-8240UWD
GY-8240FC