Display Mode - Sony DTC59ES Operating Instructions Manual

| Mover-likolam-lalem lll aritlelame)m Orelalige) |
t Panel/Remote Commander
i |
mModeao oo =
pir DD eae)
Leer
4 OPEN/CLOSE button
Press to open or close the cassette compartment.
Tape operating buttons
w (stop): Press to stop recording or playback.
> (play): Press to play back the tape.
PAUSE (pause): Press to stop for a moment during
recording or playback. To restart recording or
playback, press this button again or press the >
button.
If the unit is left in the pause mode for about 10
minutes, it will automatically be released and the
deck will enter the stop mode. To restart recording
or playback from the stop mode, press the @REC or
» button respectively.
OREC MUTE (record muting): Inserts a sound-muted
portion (space).
@REC (recording): Press to enter the record-pause
mode. After pressing this button, press the Npause
or ® button.
-</1 (AMS): Press to locate the beginning of the
selection during the playback.
</>» (rewind/review, fast-forward/cue): In the
stop mode, press to rewind/fast-forward the tape.
During playback, press to rewind or fast-forward the
tape while listening to the sound.
DISPLAY MODE button
Changes the display mode. (Refer to page 10.)
RESET
Resets the linear counter to "OM 00S".
RMS play buttons
ENTER: To program the selections in a desired order,
press this button after pressing the numeric
buttons.
CHECK: Press to check the programmed contents.
REPEAT 1/ALL button
Press to play a desired portion repeatedly. Each time
you press the button, the indicatior changes as follows:
REPEAT 1 - REPEAT ALL — off
SKIP PLAY button
Press to activate the skip ID code function. The portion
of the tape previously marked will be skipped.
CD operation buttons
Operative only for the Sony CD player equipped with a
Remote Commander.
ul (pause): Press this button twice to start playback,
Press this button once in the playback mode, the
deck enters the pause mode.
</> (AMS): Press to locate the desired selection
on the Compact Disc during playback or in the stop
mode.
CD SYNCHRO (CD synchronized recording)
buttons
(The playback of the Sony CD player equipped with a
Remote Commander and the recording of the DAT
deck can be performed simultaneously.)
STANDBY: Press to set the unit in the record-standby
mode.
START: Press to start recording of the DAT deck and
then playback of the CD player.
STOP: Press to stop the DAT deck recording and the
CD player playback.