Vendor Information Display; Serial Number Set - Sony GY-8240UWD Maintenance Manual

5-3. CUSTOM Mode

5-3-4. Vendor Information Display

Function: Displays vendor information.
Operation: Enter "2"".
CUSTOM=>2"
*****[ VENDOR INFORMATION DISPLAY ]*********************
Vendor ID (0-99999999)
Vendor name (8 characters)
Vendor ROM version (4 characters)
Machine name (16 characters)
Interface (0:SCSI-WD/1:SCSI-WS/2:SCSI-UWD/3:SCSI-LVD/8:Fibre channel/12:VRP)
Series (0:GY-10/1:GY-2120/2:GY-8240/3:DIR-240/4:DIR-120/5:EVALUATOR)
CUSTOM=>

5-3-5. Serial Number Set

Function: Sets the serial number.
Operation: Enter "3"".
The entry of the serial number will be prompted. So enter after "=>".
After entering the serial number, press ".
Pressing only " does not change the current value.
If the serial number being less than 8 characters, renew it to 8, adding '0' ahead of the original serial
number as piece as number to satisfy 8 (Refer to sample screen).
After setting the serial number, a message to confirm whether to set the value entered will be displayed.
Entering "Y"" sets the setting and writes it in the memory area for storage (NVRAM).
Entering "N"" does not change the setting.
CUSTOM=>3"
*****[ SERIAL NUMBER SET ]*************************
Serial number
Are you sure?(Y:yes/N:no)=> y"
CUSTOM=>
5-10
[0]
[SONY ]
[1.00]
[GY-8240
[2]
[2]
Vendor Information Display Screen
[00000000]
Serial Number Set Execution Screen
]
=> 00010080"
GY-8240UWD
GY-8240FC