T Drawer Assembly Replacement And Adjustment; T Drawer Assembly Replacement - Sony GY-8240UWD Maintenance Manual

3-23. T Drawer Assembly Replacement and Adjustment

3-23-1. T Drawer Assembly Replacement

3-23. T Drawer Assembly Replacement and Adjustment
3-23-1. T Drawer Assembly Replacement
Outline
Replacement
1. Removing the ME Wire
2. Removing the T Drawer Assembly
3. Installing the T Drawer Assembly
4. Installing the ME Wire
5. Confirming the ME Wire Operation
6. Confirming the T Drawer Assembly Operation
Adjustment after Replacement
7. Adjusting the Slant Guide Slantness (Refer to Section 3-23-2.)
Note
Prepare a new stop washer when replacing the T drawer assembly.
. Stop washer (d = 2.3 mm): 3-669-596-00
Tools
. Cleaning cloth: 3-184-527-01
. Cleaning fluid:
9-919-573-01
. Slide calipers (or an equivalent)
Preparation
1. Set the unit into the unthreading end mode. (Refer to step 2 in Section 3-1-3.)
2. Turn the power off and remove the power cord.
3. Remove the top panel. (Refer to Section 1-1.)
4. Remove the plate MD. (Refer to Section 1-2.)
5. Remove the cassette compartment. (Refer to Section 1-2.)
3-78
GY-8240UWD
GY-8240FC