Service Setting Mode (Lcd); Service Menu Selection Mode - Sony GY-8240UWD Maintenance Manual

The same settings as the SERVICE mode of the maintenance mode can be performed from the display
panel. (Only for some settings.)
The following describes the method of setting (SERV menu) from the display panel.
Refer to Operation Manual on other uses of the display panel.
Legend
[*]: Indicates to press the button shown in the [||].
<NORMAL>: The value in < > is the value set at shipment.

6-1. Service Menu Selection Mode

Set the service menu using the [SELECT], [&], [(], [*], [)], [ESC], [ENTER] buttons on the internal
panel. Menu items and setting values are displayed on the screen.
[ENTER] + [SELECT]: Sets the menu selection mode.
[SELECT]:
[(], [)]:
[&], [*]:
[ENTER] :
[ESC]:
No Tape
ENTER
ESC Select menu
SERV menu
SELECT
Select menu
ESC
DIAG menu
SELECT
Select menu
SERV menu
GY-8240UWD
GY-8240FC
Section 6

Service Setting Mode (LCD)

Ends the menu selection mode if during the menu selection mode.
Selects the menu item.
Selects the menu setting value.
Sets the selection.
Returns to the upper menu item. Ends the menu selection mode when the top
menu is set.
Normal mode
Service menu selection mode
SELECT
ENTER
SERV menu
ENTER
DIAG menu
6-1