3-23. T Drawer Assembly Replacement and Adjustment
3-23-1. T Drawer Assembly Replacement
Installation
3. Installing the T Drawer Assembly
(1) Clean the mounting surfaces between the T
drawer assembly and the MD base assembly.
(2) Install the T drawer assembly in the MD base
assembly and fix it with the two screws.
(3) Connect the harness to the connector of the
tape top sensor board.
(4) Hang the harness on the hook of the T drawer
assembly to fasten.
3-80
PWH3 x 8
Harness
T drawer assembly
Tape top
sensor board
Installing the T Drawer Assembly
Hook
GY-8240UWD
GY-8240FC