Sony GY-8240UWD Maintenance Manual page 180

3-25. Fan Motor Rear Panel Replacement
3. Removing the Fan Motor
Remove the two screws, then remove the fan
motor and fan bracket.
Installation
4. Installing the Fan Motor
Install a new fan motor positioning as shown in
the figure, and fix it with the two screws.
Tightening torque : 1.0 N.m (10 kgf.cm)
5. Installing the Rear Panel
Install the rear panel and fix it with the eight
screws.
_2
Tightening torque : 8 x 10
c
Be careful not to pinch the harness between the
rear panel and the chassis.
6. Connecting the Harness
(1) Connect the harness to the connector CN601
of the MB-887 board.
(2) Fasten the harness in the harness clamper.
3-94
N.m (8 kgf.cm)
Fan bracket
Fan motor
AIR FLOW
Label
Remove/Install the Fan Motor
CN601
MB-887
board
Install the Rear Panel
B4 x 30
B4 x 30
Harness clamper
Rear panel
B3 x 6
B3 x 6
B3 x 6
GY-8240UWD
GY-8240FC