5-4. DIAG Mode
5-4-8. Hours Meter Clear
Function: Clears the hours meter.
Operation: Enter "6"".
When executed, the hours meter selection message will be displayed. Select the hours meter to be cleared,
and press " to clear.
If a menu number which cannot be selected is entered, the hours meter clear menu will be exited.
1:Drum Run-1, Drum Run-2: Clears the hours meters for Drum Run-1 and Drum Run-2.
2:Thread-1:
3:Cleaning-1:
A confirmation message will be displayed. To clear, enter "y"". To not clear, enter "n"".
DIAG=> 6"
**** [HOURS METER CLEAR] ****
Select hours meter
(1:DrumRun-1,DrumRun-2/2:Thread-1/3:Cleaning-1)=>1"
Are you sure?(Y:yes/N:no)=>y"
Hours meter clear complete
DIAG=>
5-4-9. Maintenance Value Display
Function: Displays the maintenance time setting.
Operation: Enter "7"".
DIAG=> 7"
*****[ MAINTENANCE VALUE DISPLAY ]*********************
Cleaning (hours)
Maintenance-1 (hours)
DIAG=>
5-16
Clears Thread Count-1.
Clears the Cleaning roller Count-1.
Hours Meter Clear Execution Screen
[50]
[1000]
Maintenance Value Display Execution Screen
GY-8240UWD
GY-8240FC