Board Replacement - Sony GY-8240UWD Maintenance Manual

1-9-8. SV-205 Board Replacement
1. Turn the power OFF and remove the power cord.
2. Remove the front panel. (Refer to Section 1-1.)
3. Remove the FCC panel assembly, then remove the
DPR-160 and FM-75 boards.
4. Remove the bottom plate. (Refer to Section 1-1.)
5. Remove the four screws to remove the F chassis
assembly.
6. Remove the seven screws to remove the MD shield
plate.
MD shield plate
BVTT3 x 6
GY-8240UWD
GY-8240FC
7. Loosen the two screws and pivot open the SV-205
8. Remove the nylon rivet securing the flexible card wire.
BVTT3 x 6
PWH3 x 5
F chassis assembly
PWH3 x 5
board in the arrow direction about 30-degree.
Screw
Nylon rivet
Screw
Nylon rivet
1-9. Replacement of the Boards
SV-205 board
Nylon rivet
Flexible card wire
1-25