Log Mode; Quit Tool; Display Help Menu; Clear All Logs - Sony GY-8240UWD Maintenance Manual

5-6. LOG Mode

This mode is used for displaying the LOG of each CPU.
The LOG mode can be set by entering "LOG"" from the PC. The message "LOG=>" will be displayed
as the prompt.
Enter the command number (or command) after this prompt and press " key. The command will be
executed. Entering "quit"" after this prompt terminates the LOG mode.
n
The LOG mode cannot be activated from other mode. To activate the LOG mode, terminate the current
mode first.

5-6-1. Quit Tool

Function: Exits the LOG mode and returns to the maintenance mode.
Operation: Enter "quit"".

5-6-2. Display Help Menu

Function: Displays the LOG mode menu.
Operation: Enter "help"".
LOG=> help"
+===[ Log menu ]==========================================================+
|
| quit : Quit tool
| clear: Clear all log
| adsp : Upload all set values and logs
|
| 11: FMT-CPU 12: SYS-CPU 13: SV-CPU 14: IF-CPU
|
+======================================[ Copyright(c) 2000 Sony Corp. ]===+
LOG=>

5-6-3. Clear All Logs

Function: Erases the log contents of all CPUs.
Operation: Enter "clear"".

5-6-4. Upload All Logs

Function: Uploads the log contents of all CPUs.
Used for uploading the log contents to the PC etc.
Operation: Enter "upload"".
GY-8240UWD
GY-8240FC
help : Display Help menu
upload : Upload all logs
Display Help Menu Execution Screen
5-6. LOG Mode
|
|
|
|
|
|
|
5-63