Sony GY-8240UWD Maintenance Manual page 105

8. Installing the W Cleaner Assembly
Install the W cleaner.
(Refer to steps 4 to 6 in Section 3-5.)
Adjustment after Replacement
9. Confirming the Drum Motor Operation
Refer to Section 5-4-13.
(CH08 : Drum Motor Check)
10. Adjusting the Tape Running
Refer to Section 4-3.
11. Adjusting the Tracking
Refer to Section 4-4.
12. Confirming the Drum Head Height
Refer to Section 4-10.
13. Adjusting the CTL/TC Head Height
Refer to Section 4-5.
14. Adjusting the CTL/TC Head Azimuth
Refer to Section 4-5.
15. Adjusting the CTL/TC Head Position
Refer to Section 4-7.
16. Adjusting the CONFI Head Height
Refer to Section 4-9.
17. Performing the Auto PG Adjustment
Refer to Section 5-9-6.
(3 : Auto PG adjust)
18. Performing the Playback System All
Automatic Adjustment (DTF-2)
Refer to Section 5-15-1.
(RF01: RF PB all adjustment (DTF-2))
19. Saving the RF System Adjust Data
Refer to Section 5-15-3.
(RF07: RF data save)
20. Performing the Record System All
Automatic Adjustment (DTF-2)
Refer to Section 5-15-2.
(RF05: RF REC all adjustment (DTF-2))
GY-8240UWD
GY-8240FC
21. Saving the RF System Adjust Data
Refer to Section 5-15-3.
(RF07: RF data save)
22. Confirming the Playback System Error
Rate (DTF-1)
Refer to Section 5-15-6.
(RF12: RF error rate (DTF-1 PB Align))
23. Meantime, turn the power off.
24. ATF Circuit Operation Check
Refer to Section 5-9-7.
(4 : ATF operation check)
25. SAT Circuit Operation Check
Refer to Section 5-9-8.
(5 : SAT operation check)
26. Resetting the Drum Run-1 Hours
Meter
Refer to Section 5-4-8.
3-3. Drum Assembly Replacement
3-19