Electrical Alignment Overview; Equipments And Tools Used - Sony GY-8240UWD Maintenance Manual

5-14. Electrical Alignment Overview

5-14-1. Equipments and Tools Used

Use of the following equipments listed below or their equivalent is recommended.
Equipment/Tool
Oscilloscope
*1
PC
Terminal emulator software
Alignment tape
Blank tape
Connection cable
*1: Set the RS-232C port of the PC as follows.
. For change of setting, refer to the instruction manual of the PC or software installed in the PC
(terminal emulator).
Communication baud rate: 38400 bps
Character length:
Stop bit:
Parity:
*2: Prepare this cable according to the RS-232C connector of the PC to be connected, referring to section
1-5.
Note: Use calibrated measuring devices.
GY-8240UWD
GY-8240FC
Model Name/Description
Tektronix 2465B or equivalent
Tera Term pro, etc.
YR2-1A
YR5-1A (for DTF-2)
YR5-1 (for DTF-1)
Cassette tape for DTF-2
*2
(RS-232C cross cable )
8 bits
1 bit
None
5-14. Electrical Alignment Overview
Remarks
IBM PC/AT compatible computer
Freeware
Sony part No.: 8-960-074-32
Sony part No.: 8-960-074-31
Sony part No.: 8-960-074-01
Completely erased and
recordable tape
For connecting PC and GY-8240
5-165