Sony GY-8240UWD Maintenance Manual page 407

j. SAM-FS mode
(1) Select the value to be set using the [&] and [*] keys.
(2) Press the [ENTER] key to set the selection and return to the selection of the SERV menu item.
(3) Press the [ESC] key to cancel the selection. The previous setting value remains.
(4) Press the [SELECT] key to cancel the selection and return to the normal mode. The previous setting
value remains.
The default value is [OFF].
To normal mode
To SERV menu
ENTER
SERV menu
ESC
SAM-FS [OFF]
SELECT
ENTER
ESC SERV menu
SAM-FS [ON ]
SELECT
SERV menu
SAM-FS [OFF]
k. Write retry count
(1) Select the value to be set using the [&] and [*] keys.
(2) Press the [ENTER] key to set the selection and return to the selection of the SERV menu item.
(3) Press the [ESC] key to cancel the selection. The previous setting value remains.
(4) Press the [SELECT] key to cancel the selection and return to the normal mode. The previous setting
value remains.
The default value is [00].
[00] does not mean that the maximum number of count of retry is 0, but does the same as the maximum
number already established.
To normal mode
To SERV menu
ENTER
SERV menu
ESC
WR count [00]
SELECT
ENTER
SERV menu
ESC
WR count [01]
SELECT
GY-8240UWD
GY-8240FC
Sets to the normal mode.
:9
(Normal mode hereby means the mode not to make the tape run instantly
corresponding to SCSI command of such tape transfer as Rewind.)
Sets to SAM-FS mode.
:9
(This is a mode to make the tape run instantly corresponding to SCSI
command of such tape transfer as Rewind.)
:9
:10
: Adds 1 to the number of count of retry.
: Reduces 1 from the number of count of retry.
:10
6-2. SERV Menu
6-9