Sony GY-8240UWD Maintenance Manual page 141

4. Removing the Reel Motor Plate
Assembly
(1) Pull the slide shaft toward the front panel and
take it off the motor holder assembly.
(2) Lift straight up the reel motor plate assembly
and disconnect the flexible card wire from the
reel motor board.
(3) Pull out the slide shaft from the reel motor
plate assembly.
(4) Wipe off grease remained on the surface of
the slide shaft with a cloth.
c
. Be careful not to adhere grease seared the slide
shaft to another parts.
. Be careful not to cause damage to the slide
shaft during removal.
Installation
5. Connecting the Flexible Card Wire
Connect the flexible card wire disconnected in
step 4 to a reel motor board of a new reel motor
plate assembly.
GY-8240UWD
GY-8240FC
Slide shaft
Flexible card wire
Motor holder assembly
Slide shaft
Remove the Reel Motor Plate Assembly
3-14. Reel Motor Plate Assembly Replacement
Reel motor plate assembly
3-55