Default Service Information Set - Sony GY-8240UWD Maintenance Manual

5-8-5. Default Service Information Set

Function: Sets all data for servicing to their default values.
Operation: Enter "3"".
The data in [ ] show the currently set value while the default value to be set is shown after "=>".
At the end, a confirmation message will be displayed. To set the default value, enter "y"". To cancel the
setting, enter "n"".
SERV=> 3"
Option 1 port speed(bps) (0:4800/1:9600/2:19200/3:38400)
Option 2 port speed(bps) (0:4800/1:9600/2:19200/3:38400)
BT bit ignore mode (0:OFF/1:ON)
Name Server enable mode (0:OFF/1:ON)
PetaServe mode (0:OFF/1:ON)
Report early-warning mode (0:OFF/1:ON) [1]
Manual cleaning mode (0:OFF/1:ON)
Manual Eject mode (0:OFF/1:ON)
Inquiry source version (0:ROM/1:CUSTOM) [1]
SAM-FS mode (0:OFF/1:ON)
Write Retry Count (0-20)
Read Retry Count (0-16)
Are you sure?(Y:yes/N:no)=>y
Default Values of Each Item
. Option 1 port speed:
. Option 2 port speed (PSC Port): 9600 bps
. BT bit ignore mode:
. Name Server enable mode:
. PetaServe mode:
. Report early warning mode:
. Manual cleaning mode:
. Manual eject mode:
. Inquiry source version:
. SAM-FS mode:
. Write Retry Count:
. Read Retry Count:
GY-8240UWD
GY-8240FC
[3]
[1]
[1]
[0]
[1]
[1]
[1]
[1]
[4]
[5]
Default Service Information Set Execution Screen
38400 bps
OFF
OFF
OFF
OFF
OFF
OFF
ROM
OFF
20
16
=> 3
=> 1
=> 0
=> 0
=> 0
=> 0
=> 0
=> 0
=> 0
=> 0
=> 20
=> 16
5-8. SERVICE Mode
5-111