3-17. Tape Guide Replacement
3-17. Tape Guide Replacement
Note
When replacing the tape guide, use extreme care no to damage the drum.
Preparation
1. Turn the power off and remove the power cord.
2. Remove the top panel. (Refer to Section 1-1.)
3. Remove the plate MD. (Refer to Section 1-2.)
4. Remove the cassette compartment. (Refer to Section 1-2.)
List of Tape Guide
Name
Parts to be replaced
TG-0
S plate assembly
TG-1
S tension regulator assembly Refer to Section 3-21.
TG-2
TG-2 assembly
TG-3
TG-3 assembly
TG-4
Ring assembly
TG-5
Pinch arm assembly
TG-6
Ring assembly
TG-7
Ring assembly
TG-8
T tension regulator assembly Refer to Section 3-22.
TG-9
Ring assembly
TG-10
T drawer assembly
Slant guide
3-62
Method
Refer to Section 7-2 (Exploded view).
Refer to Section 7-2 (Exploded view).
Refer to Section 7-2 (Exploded view).
Refer to Section 3-20.
Refer to Section 3-9.
Refer to Section 3-20.
Refer to Section 3-20.
Refer to Section 3-20.
Refer to Section 3-23-1.
Adjustment after replacement
Refer to "4-3. Tape Running Adjustment"
Refer to "4-4. Tracking Adjustment"
Refer to "3-23-2. Slant Guide Slantness Adjustment"
Refer to "4-3. Tape Running Adjustment"
Refer to "4-4. Tracking Adjustment"
GY-8240UWD
GY-8240FC